SEABORG 300MJ
TANACOM 1000
August 15, 2022
SEABORG 500MJ
August 15, 2022SEABORG 300MJ
DESCRIPTION
“REAL MONSTER MEGATWIN” with comfortable operation by aluminum JOG, lightweight, and further refinement of design.
Feel Alive. Feel the excitement. Feel the power.
The”big one” slowly appears from the depths. You take a deep breath‚ your lungs fill with the salty air. The anticipation makes your heart beat faster. The feeling of power and excitement surges through your body.
With a push of a lever, the reel engages, the feeling of ultimate power between man, machine and monster and so, let the battle begin!
Technologies
DAIWA TECHNOLOGY
-
- [One-hand JOG operation procedure ① Clutch OFF (insert device)]
-
- [One-handed JOG operation procedure ② Clutch ON (bottoming / shelf removal)]
-
- [One-hand JOG operation procedure ③ JOG winding (shelving, breaking, sprinkling, collecting)]
■Jog Power Lever
The new Seaborg Jog Power Lever system is designed for standup fishing techniques. With the standing fight concept in mind, the Jog Lever will allow an immediate response to wind the line. When standing with the rod/reel outfit in your right hand the lever can be controlled with your left thumb. Alternatively when using your left hand to hold the outfit, pinching the lever with your right hand will allow you to control the machine easily. This easy to use function will allow you to continuously lead the fight against your target.
■Magsealed Ball Bearing
Daiwa’s ultimate technology – Magsealed Ball Bearing prevents water and dust intrusion inside the ball bearing which greatly reduces reel corrosion and noise. Applied to the spool shaft surrounding, a place where salt and dust intrusion is most likely to happen and maintenance is difficult. This will improve the long-term durability and the smoothness.
■ATD (Automatic Drag System)
ATD gives you the power and poise to take control of whatever crosses your angling path. ATD is a combination of seven large carbon washers and improved drag grease. The new grease exhibits a low viscosity at rest, yet becomes more viscous immediately after drag startup. This reduces initial drag start-up inertia. When combined with the structural changes to the ATD Drag washers, results in a smoother stronger drag from the initial hook up, allowing you to concentrate on the fight. This tough drag function will adjust according to the pulling of fish.
■Megatwin
Daiwa’s original Seaborg Megatwin reel design utilises a two-gear ratio system. The new Seaborg employs a totally redesigned system that allows the user to immediately switch between mega-power mode and mega-speed mode by simply touching a button. During retrieve or when battling a monster the new speed function switches smoothly and effortlessly. With this functionality, an angler can alternate to the best speed, depending on the situation.
■MAGMAX_MOTOR
The strength of Seaborg’s new custom motor is in the same class as the mighty Marine Power 3000. The power and speed are quiet and smooth, and with an output of approximately 1.3 times greater than previous motors. This is the ultimate battle machine. With all this power, the new aluminium composite housing is designed to maximise the release of heat and keep the motor cool, ensuring that the power is available all the time. This monster has a tough heart inside, to challenge any fierce battle in the sea.
■ Magmite structure & FF structure Magmite structure
that maximizes the power of the motor by making full use of the limited space in the electric reel. Maximum power and speed up in a small space. In addition, the cooling effect of the motor is improved, contributing to further motor drive efficiency. By placing the motor in front of the spool, the reel is designed to have a low profile, and the FF structure makes it easy to hold and use. In addition, a level wind is placed between the motor and the spool to achieve further compactness.
■SYNCHRO LEVEL WIND
A mechanism that interlocks the left and right reciprocating motion of the level wind (line guide) according to the spool rotation when the device is dropped and when it is wound up. Maintains a clean winding state and realizes a smooth device drop. In addition, the drawer of the drag is smooth.
■ Lightweight and powerful aluminum forged arm/aluminum round knob
A large aluminum round knob that can be gripped firmly is standard equipment. It can be wound up firmly in situations where manual winding is important, such as when taking in on the boat. Since it is made of aluminum, it is easy to remove stains such as tops.
| Function/Specifications | Feature |
|---|---|
| ■ Aluminum die-cast body | The aluminum body material, which has high rigidity and little deformation, firmly supports the drive section including the motor, supporting a powerful fight. |
| ■ Infinite | A mechanism that eliminates the rattling of hand-wound reels and provides a smooth winding feel like a hand-wound reel. |
| ■ Constant speed winding mode | A function that prevents loosening by winding at a set speed regardless of the load on the reel. |
| ■Electric slow winding | A function that allows “slow winding”, which is said to be an effective technique for various target fish. Of the electric winding speed adjustment, set the speed at low speed to slow. |
| ■ Display correction function | A function that can be easily corrected during actual fishing when the counter display deviates from the thread color. |
| ■Counter from top/bottom | Since the water depth can be measured from both the top and the bottom, accurate fishing is possible in any situation and fishing. |
| ■ Short winding switch | A short winding function that winds up at the set speed just by pressing the switch when removing tana or thread dander. Choi stop switch is also used. |
| ■ Master Shakuri / Shakuri Switch |
A convenient function that invites you to the electric reel. You can freely set the width, waiting time, and range of jerking, so you can capture as you wish. |
| ■ Chumming timer & chumming timer winding | You can set the time from when you put in a device to when you retrieve it, and you can make accurate returns. With the timer display function, you can accurately grasp the time to put in the gimmick. |
| ■ Winding speed display | Function to display the actual winding speed. Useful as a guideline for speed when winding. |
| ■ Selectable boat stop | A function that automatically stops winding when the set length is reached during electric winding. If you set it to a length that is convenient for taking in, you can double the return efficiency and help prevent entanglement, which is the main cause of rod damage. |
| ■ Slow boat stop | A function that prevents disassembly due to impact by stopping slowly when the electric hoisting stops at the ship’s side. |
| ■ Line feed mechanism | A function that assists the rotation of the spool that ejects the thread by rotating the motor gear in reverse when the device is dropped. In combination with Ultra Spool Free, it is effective for fishing where you want to drop the device as soon as possible. |
| ■ Washable | It can be washed with water using a neutral detergent (however, washing by submerging it in water and hot water is strictly prohibited). |
| ■Alarm ON/OFF | ON / OFF switching of alarm switch sound is possible. |
| ■ Memory backup function | A backup function that memorizes the contents set in the mode for the next fishing trip. |
Specs
*The maximum hoisting force is a reference value based on power supply voltage 13V and shaft torque. * Kg = Kgf cm (power range for Mega Twin mechanism)
* Normal winding speed is the average winding speed of 100 m with a power voltage of 13 V and a 1 kg load.
* JAFS standard hoisting force (power range for mega twin mechanism)/speed is an approximate value at a power supply voltage of 13 V according to the Japan Fishing Goods Industry Association regulations.
*Values in ( ) are approximate values when using Super Lithium.
*Bright is our shelf sensor bright (PE).
* The amount of winding thread is a guideline and varies depending on the manufacturer, item, and tension.
Glossary
| Maximum hoisting force | Reference value based on power supply voltage 13V and shaft torque. (Power range for Mega Twin mechanism) * kg = Kgf cm (Specifications are written in simplified form.) |
|---|---|
| Normal hoisting speed | Average of 100m hoisting speed with 13V power supply and 1kg load. |
| JAFS standard hoisting force | Measured value at a power supply voltage of 13 V according to the Japan Fishing Goods Industry Association standard. Momentary maximum hoisting force at the outer diameter of the spool. (power range for mega twin mechanism) |
| JAFS standard hoisting speed | Measured value at a power supply voltage of 13 V according to the Japan Fishing Goods Industry Association standard. Hoisting speed at no load at the outer diameter of the spool. |
* “JAFS Standards” = Standards for fishing products established by the Japan Fishing Goods Industry Association.
Remark
Power supply
Daiwa’s electric reel is compatible with direct current (DC) 12V. It cannot be used with non-designated power sources, such as 100V AC for home use and 24V DC for ships. In addition, the voltage of the ship’s power supply is likely to be unstable due to the generator and wiring, and the protection circuit of the reel may be activated and the rotation may stop or become intermittent. In order to fully demonstrate the performance of the reel, please use Daiwa genuine electric reel battery.
Reviews
There are no reviews yet.