SEABORG 1200J
SEABORG 800J
August 17, 2022
SEABORG 500JP/JS
August 18, 2022SEABORG 1200J
DESCRIPTION
Its performance, monster class “BIG MONSTER”.
One of the strongest machines in the Seaborg series, which was born with the latest technology after repeated rigorous tests for the purpose of catching the big fish of your dreams. The abundant line capacity of PE8-1000m supports you to reach the deep sea. A wide range of areas can be targeted, from mid- to deep-sea areas targeting large fish such as yellowfin tuna, amberjack, and grouper (ara), as well as alfonsino and mussels.
Technologies
DAIWA TECHNOLOGY
■ JOG power lever
The new Seaborg Jog Power Lever system is designed for standup fishing techniques. With the standing fight concept in mind, the Jog Lever will allow an immediate response to wind the line. When standing with the rod/reel outfit in your right hand the lever can be controlled with your left thumb. Alternatively when using your left hand to hold the outfit, pinching the lever with your right hand will allow you to control the machine easily. This easy to use function will allow you to continuously lead the fight against your target.
■ Magsealed ball bearing
Daiwa’s ultimate technology – Magsealed Ball Bearing prevents water and dust intrusion inside the ball bearing which greatly reduces reel corrosion and noise. Applied to the spool shaft surrounding, a place where salt and dust intrusion is most likely to happen and maintenance is difficult. This will improve the long-term durability and the smoothness.
■ MEGATORQUE motor
The strength of Seaborg’s new custom motor is in the same class as the mighty Marine Power 3000. The power and speed is quiet and smooth, and with an output of approximately 1.3 times greater than previous motors. This is the ultimate battle machine. With all this power, the new aluminum composite housing is designed to maximize the release of heat and keep the motor cool, ensuing that the power is available all the time. This monster has a tough heart inside, to challenge any fierce battle in the sea.
■ ATD (automatic drag system)
ATD gives you the power and poise to take control of whatever crosses your angling path. ATD is a combination of seven large carbon washers and improved drag grease. The new grease exhibits a low viscosity at rest, yet becomes more viscous immediately after drag startup. This reduces initial drag start-up inertia. When combined with the structural changes to the ATD Drag washers, results in a smoother stronger drag from the initial hook up, allowing you to concentrate on the fight. This tough drag function will adjust according to the pulling of fish.
Other functions and specifications
| Function/Specifications | Feature |
|---|---|
| Synchro level wind | A mechanism that interlocks the left and right reciprocating motion of the level wind (line guide) according to the rotation of the spool both when the device is dropped and when it is hoisted. Maintains a clean bobbin state and realizes smooth and high-speed gimmick drop. In addition, the drawer of the drag is smooth. |
| Aluminum die-cast body | The aluminum body material, which has high rigidity and little deformation, firmly supports the drive section including the motor, supporting a powerful fight. |
| Ultra spool free | High-speed drop performance realized by separating the gear of the spool and the motor part to eliminate resistance to the rotation of the spool. |
| Number of CRBBs/total number of BBs | 0/15 |
| Electric slow winding | A function that allows “slow winding”, which is said to be an effective technique for various target fish. Of the electric winding speed adjustment, set the speed at low speed to slow. |
| Display correction function | A function that can be easily corrected during actual fishing when the counter display deviates from the thread color. |
| Drop prevention spool-free adjustment dial | A spool-free adjustment dial with a structure that does not fall off even if it loosens unnoticed. |
| Counter from top/bottom | Since the water depth can be measured from both the top and the bottom, accurate fishing is possible in any situation and fishing. |
| Short winding/stop switch | A short winding function that winds up at the set speed just by pressing the switch when removing tana or thread dander. Choice stop switch is also used. |
| Master Shakuri / Shakuri Switch |
A convenient function that invites you to the electric reel. You can freely set the width, waiting time, and range of jerking, so you can capture as you wish. |
| Frame timer & frame timer winding |
A coma set timer that allows you to accurately grasp the time to put the device in with the timer display function. You can set the time from when the device is put in until it is collected, and it is automatically collected electrically. Frame timer winding that can be accurately reworked. |
| Hoisting speed actual value display | Function to display the actual winding speed. Useful as a guideline for speed when winding. |
| Boat stop remaining time display | A function that displays the remaining time until the boat stops. Effective for deep-field aiming. |
| Selectable boat stop | A function that automatically stops winding when the set length is reached during electric winding. If you set it to a length that is convenient for taking in, you can double the return efficiency and help prevent entanglement, which is the main cause of rod damage. |
| Slow boat stop | A function that prevents disassembly due to impact by stopping slowly when the electric hoisting stops at the ship’s side. |
| Washable | It can be washed with water using a neutral detergent (however, washing by submerging it in water and hot water is strictly prohibited). |
| Alarm ON/OFF | ON / OFF switching of alarm switch sound is possible. |
| Memory backup function | A backup function that memorizes the contents set in the mode for the next fishing trip. |
Specs
* Figures in parentheses in the table are approximate values when using Super Lithium.
* The amount of winding thread is a guideline and varies depending on the manufacturer, item, and tension.
Accessories
- Rod clamp
- Reel bag
- Threading pin
- Tool
- Power cord for this model
Glossary
| Maximum hoisting force | Reference value based on power supply voltage 13V and shaft torque. (Power range for Mega Twin mechanism) * kg = Kgf cm (Specifications are written in simplified form.) |
|---|---|
| Normal hoisting speed | Average of 100m hoisting speed with 13V power supply and 1kg load. |
| JAFS standard hoisting force | Measured value at a power supply voltage of 13 V according to the Japan Fishing Goods Industry Association standard. Momentary maximum hoisting force at the outer diameter of the spool. (power range for mega twin mechanism) |
| JAFS standard hoisting speed | Measured value at a power supply voltage of 13 V according to the Japan Fishing Goods Industry Association standard. Hoisting speed at no load at the outer diameter of the spool. |
* “JAFS Standards” = Standards for fishing products established by the Japan Fishing Goods Industry Association.
Remark
Power supply
Daiwa’s electric reel is compatible with direct current (DC) 12V. It cannot be used with non-designated power sources, such as 100V AC for home use and 24V DC for ships. In addition, the voltage of the ship’s power supply is likely to be unstable due to the generator and wiring, and the protection circuit of the reel may be activated and the rotation may stop or become intermittent. In order to fully demonstrate the performance of the reel, please use Daiwa genuine electric reel battery.
Reviews
There are no reviews yet.