SEABORG 1200MJ

 

 

---

■ MEGATWIN

Daiwa’s original Seaborg Megatwin reel design utilises a two-gear ratio system. The new Seaborg employs a totally redesigned system that allows the user to immediately switch between mega-power mode and mega-speed mode by simply touching a button. During retrieve or when battling a monster the new speed function switches smoothly and effortlessly. With this functionality, an angler can alternate to the best speed, depending on the situation.

 

 

---

■ ATD (automatic drag system)

ATD gives you the power and poise to take control of whatever crosses your angling path. ATD is a combination of seven large carbon washers and improved drag grease. The new grease exhibits a low viscosity at rest, yet becomes more viscous immediately after drag startup. This reduces initial drag start-up inertia. When combined with the structural changes to the ATD Drag washers, results in a smoother stronger drag from the initial hook up, allowing you to concentrate on the fight. This tough drag function will adjust according to the pulling of fish.

 

 

---

■ Aluminum motor housing

FF structure designed with a low profile reel by placing the motor in front of the spool. This motor housing, which is easy to hold and has a high cooling effect, is made of aluminum to improve heat dissipation performance.

 

 

 

---

Impossibly free.

---

■ JOG power lever

The new Seaborg Jog Power Lever system is designed for standup fishing techniques. With the standing fight concept in mind, the Jog Lever will allow an immediate response to wind the line. When standing with the rod/reel outfit in your right hand the lever can be controlled with your left thumb. Alternatively when using your left hand to hold the outfit, pinching the lever with your right hand will allow you to control the machine easily. This easy to use function will allow you to continuously lead the fight against your target.

 

 

 

---

■ Magsealed ball bearing

Daiwa’s ultimate technology – Magsealed Ball Bearing prevents water and dust intrusion inside the ball bearing which greatly reduces reel corrosion and noise. Applied to the spool shaft surrounding, a place where salt and dust intrusion is most likely to happen and maintenance is difficult. This will improve the long-term durability and the smoothness.

 

 

 

---

■ Dot Screen Display

Out in the field it can be tough to read anything on an LCD screen due to sun glare or sunglasses. The Seaborg’s LCD screen displays large letters/numbers and uses a dotted LCD screen to make it easier for anglers to see the display. Line input procedures are selectable in Japanese or English languages. Just let the D-Vec letters on the start screen lead you to the exciting world of Dendoh reel fishing.

 

 

(* The picture of function explanation uses Seaborg 800MJ)

Technologies

Other functions and specifications

---

Function/Specifications	Feature
Synchro level wind	A mechanism that interlocks the left and right reciprocating motion of the level wind (line guide) according to the rotation of the spool both when the device is dropped and when it is hoisted. Maintains a clean bobbin state and realizes smooth and high-speed gimmick drop. In addition, the drawer of the drag is smooth.
Aluminum die-cast body	The aluminum body material, which has high rigidity and little deformation, firmly supports the drive section including the motor, supporting a powerful fight.
Ultra spool free	High-speed drop performance realized by separating the gear of the spool and the motor part to eliminate resistance to the rotation of the spool.
Number of CRBBs/total number of BBs	0/22
Electric slow winding	A function that allows “slow winding”, which is said to be an effective technique for various target fish. Of the electric winding speed adjustment, set the speed at low speed to slow.
Display correction function	A function that can be easily corrected during actual fishing when the counter display deviates from the thread color.
Drop prevention spool-free adjustment dial	A spool-free adjustment dial with a structure that does not fall off even if it loosens unnoticed.
Counter from top/bottom	Since the water depth can be measured from both the top and the bottom, accurate fishing is possible in any situation and fishing.
Short winding/stop switch	A short winding function that winds up at the set speed just by pressing the switch when removing tana or thread dander. Choice stop switch is also used.
Master Shakuri / Shakuri Switch	A convenient function that invites you to the electric reel. You can freely set the width, waiting time, and range of jerking, so you can capture as you wish.
Frame timer & frame timer winding	A coma set timer that allows you to accurately grasp the time to put the device in with the timer display function. You can set the time from when the device is put in until it is collected, and it is automatically collected electrically. Frame timer winding that can be accurately reworked.
Hoisting speed actual value display	Function to display the actual winding speed. Useful as a guideline for speed when winding.
Boat stop remaining time display	A function that displays the remaining time until the boat stops. Effective for deep-field aiming.
Selectable boat stop	A function that automatically stops winding when the set length is reached during electric winding. If you set it to a length that is convenient for taking in, you can double the return efficiency and help prevent entanglement, which is the main cause of rod damage.
Slow boat stop	A function that prevents disassembly due to impact by stopping slowly when the electric hoisting stops at the ship’s side.
Washable	It can be washed with water using a neutral detergent (however, washing by submerging it in water and hot water is strictly prohibited).
Alarm ON/OFF	ON / OFF switching of alarm switch sound is possible.
Memory backup function	A backup function that memorizes the contents set in the mode for the next fishing trip.

Video

Specs

* Figures in parentheses in the table are approximate values ​​when using Super Lithium.
* The amount of winding thread is a guideline and varies depending on the manufacturer, item, and tension.

Accessories

• Rod clamp
• Chloroprene reel bag
• Threading pin
• Tool
• Power cord for this model

---

Glossary

---

Maximum hoisting force	Reference value based on power supply voltage 13V and shaft torque. (Power range for Mega Twin mechanism) * kg = Kgf cm (Specifications are written in simplified form.)
Normal hoisting speed	Average of 100m hoisting speed with 13V power supply and 1kg load.
JAFS standard hoisting force	Measured value at a power supply voltage of 13 V according to the Japan Fishing Goods Industry Association standard. Momentary maximum hoisting force at the outer diameter of the spool. (power range for mega twin mechanism)
JAFS standard hoisting speed	Measured value at a power supply voltage of 13 V according to the Japan Fishing Goods Industry Association standard. Hoisting speed at no load at the outer diameter of the spool.

* “JAFS Standards” = Standards for fishing products established by the Japan Fishing Goods Industry Association.

 

Remark

Power supply

---

Daiwa’s electric reel is compatible with direct current (DC) 12V. It cannot be used with non-designated power sources, such as 100V AC for home use and 24V DC for ships. In addition, the voltage of the ship’s power supply is likely to be unstable due to the generator and wiring, and the protection circuit of the reel may be activated and the rotation may stop or become intermittent. In order to fully demonstrate the performance of the reel, please use Daiwa genuine electric reel battery.