Weight 585g. Lightness is sensitivity “LIGHT MONSTER 2”.
One-finger operation, the JOG Power Leaver allows for instant, variable speed, and power adjustment without having to take your hand off the rod.
Daiwa’s ultimate technology – Magsealed Ball Bearing prevents water and dust intrusion inside the ball bearing which greatly reduces reel corrosion and noise. Applied to the spool shaft surrounding, a place where salt and dust intrusion is most likely to happen and maintenance is difficult. This will improve the long-term durability and the smoothness.
The strength of Seaborg’s new custom motor is in the same class as the mighty Marine Power 3000. The power and speed are quiet and smooth, and with an output of approximately 1.3 times greater than previous motors. This is the ultimate battle machine. With all this power, the new aluminium composite housing is designed to maximise the release of heat and keep the motor cool, ensuring that the power is available all the time. This monster has a tough heart inside, to challenge any fierce battle in the sea.
ATD gives you the power and poise to take control of whatever crosses your angling path. ATD is a combination of seven large carbon washers and improved drag grease. The new grease exhibits a low viscosity at rest, yet becomes more viscous immediately after drag startup. This reduces initial drag start-up inertia. When combined with the structural changes to the ATD Drag washers, results in a smoother stronger drag from the initial hook up, allowing you to concentrate on the fight. This tough drag function will adjust according to the pulling of fish.
Maximizing the power of the motor with full use of the limited space of the electric reel, speeding up the motor to its maximum power using a small space. It also has a cooling eect of the motor, which contributes greatly to the eciency of the motor.
FF STRUCTURE
Placing the motor, which is equivalent to the engine of electric reels, in front of the spool makes the reel body even more low profile. Frontplaced motor reels are easier to hold and manipulate. The level wind is moved to between the spool and the motor makes the structure even more compact on the whole
A mechanism that lets the level wind lower in synch with the rig, the spool rotates while moving side to side during line retrieval. Line lays more evenly thus allowing it to fall more smoothly, and also enhances drag performance.
Other functions and specifications
This brake system allows you to set instantly the falling speed of the rig by operating the dial. It also prevents backlash (twists caused by a slack line). Adjust the strength of the brake depending on how much the boat is swaying, how heavy the rig is, etc.
Out in the field it can be tough to read anything on an LCD screen due to sun glare or sunglasses. The Seaborg’s LCD screen displays large letters/numbers and uses a dotted LCD screen to make it easier for anglers to see the display. Line input procedures are selectable in Japanese or English languages. Just let the D-Vec letters on the start screen lead you to the exciting world of Dendoh reel fishing.
When wind up with JOG Power Lever:
1) Clutch ON => Electric wind up
2) Clutch OFF => Motor OFF
[Merits]
1) Winding starts with good response at the speed when the clutch is ON
2) Motor stops during fall can catch the fish’s bite easily
[Points to Note]
*By strengthening the clutch, it is possible to control the ON/OFF at maximum winding
*The counter can move under 9m deep
*There are no auto functions for the line drop (No such setting as well)
3 Types of Alarms are selectable
*FL/UP1: Sound every 10m
*FL/UP3: Sound one time at 10m, sound two times at 20m, sound three times at 30m then repeat.
*FL/UP5: Sound one time at 10m….. sound five times at 50m then repeat.
*OFF setting is selectable
The sound when pull out the drag is selectable
*Total 3 types of sounds is selectable
Lever wind that is available even for PE#5 Shore Leader #30
Function/Specifications | Feature |
---|---|
Aluminum die-cast body | The aluminum body material, which has high rigidity and little deformation, firmly supports the drive section including the motor, supporting a powerful fight. |
Infinite | A mechanism that eliminates the rattling of hand-wound reels and provides a smooth winding feeling like a hand-wound reel. |
Ultra spool free | High-speed drop performance realized by separating the gear of the spool and the motor part to eliminate resistance to the rotation of the spool. |
Constant speed winding mode | A convenient function that automatically adjusts the hoisting speed according to changes in the load on the reel and always hoists at a set constant speed to prevent breakage. |
Electric slow winding | A function that allows “slow winding”, which is said to be an effective technique for various target fish. For the electric winding speed adjustment, set the speed from low speed to slow. |
Display correction function | A function that can be easily corrected during actual fishing when the counter display deviates from the thread color. |
Counter from top/bottom | Since the water depth can be measured from both the top and the bottom, accurate fishing is possible in any situation and fishing. |
Short winding/stop switch | A short winding function that winds at the set speed just by pressing the switch when removing tana or thread dander. Choice stop switch is also used. |
Jerking/jerking switch | A convenient function that invites you to the electric reel. You can freely set the width, waiting time, and range of jerking, so you can capture as you wish. |
Timer & timer winding | A timer that allows you to accurately grasp the time to put in the device with the timer display function. You can set the time from when the device is put in until it is collected, and it is automatically collected electrically. Timer winding that can be accurately reworked. |
Hoisting speed actual value display | Function to display the actual winding speed for one minute. Useful as a guideline for speed when winding. |
Selectable boat stop | A function that automatically stops winding when the set length is reached during electric winding. If you set it to a length that is convenient for taking in, you can double the return efficiency and help prevent entanglement, which is the main cause of rod damage. |
Slow boat stop | A function that prevents disassembly due to impact by stopping slowly when the electric hoisting stops at the ship’s side. |
Yarn feed mechanism | A function that assists the rotation of the spool that ejects the thread by rotating the motor gear in reverse when the device is dropped. In combination with Ultra Spool Free, it demonstrates its power in fishing where the drop speed of the device affects the catch. |
Washable | It can be washed with water using a neutral detergent (however, washing by submerging it in water and hot water is strictly prohibited). |
Alarm ON/OFF | ON / OFF switching of alarm switch sound is possible. |
Memory backup function | A backup function that memorizes the contents set in the mode for the next fishing trip. |
*The maximum hoisting force is a reference value based on power supply voltage 13V and shaft torque. * Kg = Kgf cm (power range for Mega Twin mechanism)
* Normal winding speed is the average winding speed of 100 m with a power voltage of 13 V and a 1 kg load.
* JAFS standard hoisting force (power range for mega twin mechanism)/speed is an approximate value at a power supply voltage of 13 V according to the Japan Fishing Goods Industry Association regulations.
*Values in ( ) are approximate values when using Super Lithium.
*Bright is our shelf sensor bright (PE).
* The amount of winding thread is a guideline and varies depending on the manufacturer, item, and tension.
Proof of quality, Daiwa electric reel guarantee system
Daiwa’s electric reel series is not covered until one year from the date of purchase, or until the usage time reaches 200 hours, or the total winding time reaches 100 km (replacement of drag washers, grease, etc., replacement, dropping, etc.)・We have introduced a reliable warranty system that promises a free warranty, excluding repairs for damage caused by impact, etc. For details, please check with the retailer at the time of purchase.
Accessories
Glossary
Maximum hoisting force | Reference value based on power supply voltage 13V and shaft torque. (Power range for Mega Twin mechanism) * kg = Kgf cm (Specifications are written in simplified form.) |
---|---|
Normal hoisting speed | Average of 100m hoisting speed with 13V power supply and 1kg load. |
JAFS standard hoisting force | Measured value at a power supply voltage of 13 V according to the Japan Fishing Goods Industry Association standard. Momentary maximum hoisting force at the outer diameter of the spool. (power range for mega twin mechanism) |
JAFS standard hoisting speed | Measured value at a power supply voltage of 13 V according to the Japan Fishing Goods Industry Association standard. Hoisting speed at no load at the outer diameter of the spool. |
* “JAFS Standards” = Standards for fishing products established by the Japan Fishing Goods Industry Association.
Power supply
Daiwa’s electric reel is compatible with direct current (DC) 12V. It cannot be used with non-designated power sources, such as 100V AC for home use and 24V DC for ships. In addition, the voltage of the ship’s power supply is likely to be unstable due to the generator and wiring, and the protection circuit of the reel may be activated and the rotation may stop or become intermittent. In order to fully demonstrate the performance of the reel, please use Daiwa genuine electric reel battery.
Reviews
There are no reviews yet.